Jobsite Security Cameras: How to Get Started
Put cameras up before anything worth taking arrives on site — usually at mobilization, before the first material and equipment deliveries. Start with the entrance and the areas where materials and equipment sit overnight, then add cameras as the project grows.
Good to know: EyeCore has continuous 24/7 recording — every minute is saved, not only short clips when motion is detected — and detections are marked on the timeline.
When should cameras go up?
The best time is at mobilization, before the first deliveries. The site is easiest to cover when it's empty, and the first loads of lumber, wire, copper and equipment are often the most exposed. If you're starting late, put them up before the next big delivery.
What to cover first
- The entrance and gate — every vehicle comes in and out here.
- Material laydown and storage yards.
- Equipment parking.
- The site office or trailer and any conex/storage containers.
- Later phases: interior work areas once materials move inside.
How many cameras does a jobsite need?
Count the areas from the list above, not the acres. A small residential lot with one gate may need one or two cameras; a commercial site with separate material yards, equipment parking and several entrances needs one per area. Start with the gate and the yard, and add cameras as phases open up. If you want a layout for your site, send us the plan and we'll suggest placements.
Rent or buy?
If you run one short project a year, renting can make sense. If you build continuously, buying usually adds up — you move the same cameras from site to site. EyeCore Annual is $3,999 per camera for the first year with the camera, solar kit, mounting hardware and data included, then $349/month, and the hardware stays yours. Subject to final pricing confirmation.
Prefer to rent in Arizona? See EyeBuild rentals
Moving cameras between phases and sites
Because each camera runs on solar and 4G LTE, moving it is just unmounting, relocating and re-aiming — no electrician and no new internet line. Check sun and signal at the new spot first.
Record everything, not just motion
On a jobsite, the question is often 'what happened between 6 p.m. and 6 a.m.?' A camera that only saves motion clips can leave gaps. EyeCore records continuous 24/7 recording, so you can scroll the timeline to any minute — deliveries, who came and went, when something moved.
Security and progress from the same camera
Because the footage is continuous, the same camera watches the site at night and documents progress by day. EyeCore includes unlimited time-lapse generation, so you can share progress with owners and your team from the footage you're already recording.
Who watches the footage?
Most builders start by watching it themselves: live view on a phone and detections in the dashboard. If you want someone else watching, add professional monitoring by an independent monitoring center for $129/month per camera.
Your first-week checklist
- Mark the gate, yard and equipment parking on the site plan
- Check sun and cell signal at each spot
- Pick cameras with continuous 24/7 recording, not motion-only clips
- Mount the gate camera first
- Share live-view access with the superintendent
- Re-check placement at every major phase change
Frequently asked questions
When should I install security cameras on a construction site?
At mobilization, before the first material and equipment deliveries.
How many cameras does a construction site need?
One per area you need to see — usually the gate, the material yard and equipment parking to start, more as phases open.
Can I move jobsite cameras to the next project?
Yes. A solar 4G LTE camera needs no power or internet hookup, so you can unmount it and set it up at the next site.
Related guides
Do you need a trailer? Compare first · See EyeCore
Get an EyeCore quote